Best Used Belt Disc Sander
Nowadays, there are so many products of used belt disc sander in the market and you are wondering to choose a best one.You have searched for used belt disc sander in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings used belt disc sander which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Amazon.com
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
Rockwell RK7866 Belt Disc Sander
Amazon.com
- Belt platform adjusts from 0 to 90 degrees for horizontal and vertical sanding
- Sanding table adjusts from 0 to 45 degrees for sanding beveled edges
- 4.3 Amp heavy duty induction motor for dependable performance
- Quik-release belt tension lever for easy belt changes
The Rockwell RK7866 Shop Series 1/2 horsepower belt/disc sander comes with a 4-inch by 36-inch belt sander and a 6-inch disc sander. The belt table tilts 0 to 90 degrees and the cast-aluminum disc table has a tilt range of 0 to 45 degrees. It is also equipped with an adjustable belt tensioning mechanism which makes for quick and easy belt changes. This unit comes with a 45-degree miter gauge, Allen key, belt sander and disc sander.
SEARS/CRAFTSMAN Disc Sander Replacement Toothed Belt P/N 814002-3
SEARS/CRAFTSMAN Disc Sander Replacement Toothed Belt P/N 814002-3 Fits Craftsman 11322653 11322643 Part Number 814002-3
POWERTEC BD6900 Woodworking Belt Disc Sander w/ Built-In Dust Collection, 6 x 9-Inch
Amazon.com
- Built-in Dust Collection System for Fast Removal of Wood Chips into a Full Size Dust Bag
- Cast Iron Working Table
- Interchangeable Work Table Works With Both Disc and Belt Sanders
- 0° - 45° Work Table with Miter Gauge for Precise Angle Sanding
- EZ Belt Change
Product description
SPECIFICATIONS- Motor: Induction, 120V, 60 Hz, 1-1/5 HP (peak), 7.5 Amps. Cast Aluminum working table, 7″ x 10″, Belt size: 6″ x 48″, Belt Platen Area: 6 x 13-1/2″, Belt Speed: 2400 FPM, Disc Diameter: 9″, Disc Speed: 3100 RPM
From the Manufacturer
Motor: Induction, 120V, 60 Hz, 1-1/5 HP (peak), 7.5 Amps. Aluminum working table, 7-Inch x 10-Inch, Belt size: 6-Inch x 48-Inch, Belt Platen Area: 6 x 13-1/2-Inch, Belt Speed: 2400 FPM, Disc Diameter: 9-Inch, Disc Speed: 3100 RPM.
POWERTEC BD4600 Woodworking Belt Disc Sander, 4 x 6-Inch
Amazon.com
- Includes: heavy duty belt and disc sander combination flaunts a 4”x36” sanding belt, 6” sanding disc, A belt with 0° -90° tilt including a work support, a disc work table with 0° - 45° tilt, a heavy duty miter gauge, and a dust port
- Features: a 6-1/2 x 8-3/4 inch cast aluminum table that provides exceptional work support and tilts up to 45 degrees, precision tracking system, a safety key switch, and a quick release belt change
WEN 6515 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
Amazon.com
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
Palmgren 2" x 42" Belt, 6" Disc bench finishing machine
JET J-4002 1-Inch by 42-Inch Bench Belt and Disc Sander
Amazon.com
- Hinged idler wheel cover. Horse power: 1/3HP, 115VAC, 1ph
- Power take off allows for mounting an optional flex shaft for carving, drum sanding, deburing, and more
- Deluxe miter gauge turns and locks for common angles, 45 degrees left and right
- Abrasive belt unit does the work of a jig-saw, copying saw or hand file while removing material and finishing at the same time
- Removable platen allows for sanding, grinding, or finishing of outside curves or odd shaped work pieces on the belt
POWERTEC BD4800 Woodworking Belt Disc Sander Machine w/ Built-In Dust Collection System
Amazon.com
- Includes: heavy duty belt and disc sander combination flaunts a 4”x36” sanding belt, 8” sanding disc, work table with 0° - 45° tilt, heavy duty miter gauge and built-in dust collection system
- FEATURES: An interchangeable 6-1/2x8-3/4 inch cast aluminum table that provides exceptional work support and tilts up to 45 degrees, precision tracking system, and toggled power switch
- 2-1 design: sanding machine is equipped with both, an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
Amazon.com
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
KASTFORCE KF6004 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
Amazon.com
- Belt and disc directly driven by motor shaft , maintenance free, no need adjusting the belt tension, change damage belt like before
- Motor direct drive design supplies 25% more sanding efficiency. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt works at 0 or 90 degrees depending on customer needs, driven drum allows sanding of curved work pieces. Quick sanding belt replacement design & humanized track control
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
Amazon.com
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
EX ELECTRONIX EXPRESS Mini 1 x 30 Belt Sander 3400 RPM
Over All Dim: 9″L x 11″W x 13-1/2″H
POWERTEC 110270 6-Inch PSA 150 Grit Aluminum Oxide Adhesive Sanding Disc, 10-Pack
Amazon.com
- Premium aluminum oxide grain for optimal sanding capacity
- Pressure sensitive adhesive backing and C-weight paper
- Resin on resin bond for heat resistance
- Consistent cut and uniform finishes
- Applications: wood / aluminum / non-ferrous metal / plastic / fiberglass/ painted surfaces
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
1″ x 30″ Belt / 5″ Disc Sander #50-151 is great for working on small craft projects – home decorations, jewelry, toys, doll furniture, repair work and more. The machine’s small motor is very efficient in driving the belt and disc, so stock removal goes quickly. Recommended for light-duty use.
Grizzly G0547 Combo Sander with 6-Inch Disc Belt, 4 x 36-Inch
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
Amazon.com
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
