The Best Value Home Hardware Smoke And Co2 Detectors
Finding your suitable readers for value home hardware smoke and co2 detectors is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for value home hardware smoke and co2 detectors including detail information and customer reviews. Let’s find out which is your favorite one.
578 reviews analysed
Kidde Carbon Monoxide Alarm
- Peak Level Button – Displays the peak CO level recorded by the alarm since it was last reset or unplugged
- Test Button Functions – Tests the unit for proper operation and resets the Carbon Monoxide alarm
- LED Operation – Blinking dot in lower right corner of display denotes normal operation
- Ten years after the initial power up, this alarm will “beep” two times every 30 seconds to indicate that it is time to replace the alarm.
- NOTE: This CO alarm is not battery operated. However, these alarms are equipped with 9 volt battery backup – the 9 volt battery is to supply short term back-up during a power outage.
Product Description
Digital Display – Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds
Amazon.com
Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.
|
 This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger. |
 The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger. |
Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels–even during power outages.
About Carbon Monoxide: The Silent Killer
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.
Audible Alarm Pattern Alerts you to Elevated CO Levels
When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.
Easy-to-Read Digital Display Shows CO Levels
The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.
LED Shows Sensor Status
With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.
Convenient Mounting Options
The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.
The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.
About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.
What’s in the Box
Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.
 Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image. |
Nighthawk Plug-in Carbon Monoxide & Explosive Gas Detector Alarm with Digital Display | Model KN-COEG-3
- Protects you and your family from two deadly threats: carbon monoxide and explosive gas.
- Sounder Alarm – The KN-COEG-3 offers a loud 85-decibel pulsing alarm that will sound to alert you to a potential problem.
- Digital Display – Displays the level of carbon monoxide the unit is sensing.
- Peak Level Memory – Recalls the highest CO concentration detected
- Test/Reset Button – Tests unit’s electronic circuitry operation and allows you to immediately silence the alarm
- Two alarms in one detects carbon monoxide and explosive gas
- Three convenient mounting options
- Digital display and peak level button displays the peak CO level recorded by the alarm since it was last reset
- Battery backup 9 volt battery included
- Kidde’s carbon monoxide alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Product Description
The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from two deadly threats. The KN-COEG-3 includes 9V battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. Temperature range- 40 degree fahrenheit to 100 degree fahrenheit.
Amazon.com
Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.
Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring–even during power outages.
The Dangers of Carbon Monoxide, Methane, and Propane Exposure
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.
Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.
Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels
When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with “GAS” shown in the display.
Easy-to-Read Digital Display Shows CO Levels
The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.
LED Shows Sensor Status
With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.
Convenient Mounting Options
The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.
The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.
About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.
What’s in the Box
Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.
Kidde Battery Operated Carbon Monoxide Alarm with Digital Display KN-Copp-B-LPM
- Digital Display – Displays the level of carbon monoxide the unit is sensing. Shows CO level in PPM (parts per million). Updates digital reading every 15 seconds allowing you to see if levels change. Peak Level Memory displays the highest CO concentration measured since the last reset
- Battery Operated – Provides best protection during power outages. Battery Safeguard makes it difficult to close the cover without batteries in the unit. Low Battery Signal alerts user when the batteries need to be replaced. Slide-Out Battery Door Cover gives immediate access to batteries
- Test/Reset Button – Tests unit’s electronic circuitry & horn and resets the unit during alarm. Tests CO alarm circuit operation and allows you to immediately silence the alarm
- LED’s – Green LED for normal operation, Red LED for alarm. Temperature range 40˚F (4.4˚C) to 100˚F (37.8˚C)
- Provides peace of mind against the silent killer and a digital display
Product Description
The Kidde KN-COPP-B-LPM battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-B-LPM will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. It has a 10-year life and a 10-year limited warranty.
Amazon.com
Kidde’s KN-COPP-LPM battery-operated carbon monoxide alarm with digital display helps to provide your home with extensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.
|
 Kidde’s KN-COPP-LPM carbon monoxide detector is a free-standing unit, adding flexibility to placement around your home. View larger |
Features
The KN-COPP-LPM is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The easily visible digital display indicates the level of CO that the unit is sensing, and it updates the status every 15 seconds for timely and accurate readings. Its free-standing design allows for attachment to a wall or placement on a counter or nightstand for convenient and comprehensive protection. The KN-COPP-LPM also includes a slide-out battery door that provides immediate access to the power source as well as a battery safeguard that makes it difficult to close the cover without batteries installed. An LED lighting system on the unit signals power levels and sourcing: the green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, and the red LED will pulse to indicate carbon monoxide has been detected until the device is reset or the CO threat is eliminated. This device has an expected 7-year lifespan and comes equipped with a five-year manufacturer’s limited warranty.
What’s in the Box
One Kidde KN-COPP-LPM battery-operated carbon monoxide alarm with digital display and three AA batteries.
 |
 |
|
| The KN-COPP-LPM features an easy-to-read digital display in front and an easy-access door to the batteries in back. (Click each to enlarge) | ||
Kidde KN-COB-B-LP2 Carbon Monoxide Alarm
Product Description
The Kidde 9Co5 Battery-Operated Carbon Monoxide Detector Utilizes Sophisticated Electronic Components To Protect Individuals And Families. Its Snap-On Cover Provides Immediate Battery Access, While Its Safety Feature Makes It Difficult To Close The Cover If The Batteries ArenMade in: United States Dimensions: 11.5 X 11.5 X 7.5Brand: Kidde Item Weight: 0.75includes: Unit Instruction Guide
Amazon.com
Kidde 9CO5-LP
With the use of sophisticated electronic components, the Kidde 9CO5-LP battery-operated carbon monoxide alarm protects you and your family from the dangers of carbon monoxide. Also included is an intuitive slide-out battery door that gives easy and immediate access to the batteries and a safety feature mechanism that makes the unit difficult to close without the proper installation of the batteries. This easy-to-install alarm is appropriate for all living areas and comes with a 7-year life warranty and 5-year limited warranty.
Consumer Benefits
The Kidde 9CO5-LP will alert you and your family with a loud warning signal against the dangers of elevated carbon monoxide levels in your home. This battery-operated carbon monoxide alarm continuously monitors carbon monoxide levels, even during power outages when AC-only units are not providing protection.
Technical Specifications
This unit uses an electrochemical sensor, and when it detects carbon monoxide, it will alert the user with a distinct pattern. The alarm pattern is four short beeps, followed by five seconds of silence, then four more short beeps with a corresponding red LED light. This cycle will continue for four minutes and then change to one cycle every minute until the device is reset or the carbon monoxide is eliminated. In addition, the red LED light will pulse to indicate carbon monoxide has been detected until the device is reset or carbon monoxide is removed from the surrounding area. When there is no carbon monoxide present, a green LED light will flash every 30 seconds, indicating a properly operating alarm when power is present.
What’s in the Box
One Kidde 9CO5-LP unit and two AA batteries.
Features/Specifications
- Battery operated (3AA batteries included) – Provides protection during power outages
- Battery lockout system – Deters covering battery compartment without installation of batteries
- Slide-out battery door cover – Gives immediate access to batteries
- Test/reset button – Tests the unit for proper operation and can also reset the Carbon Monoxide alarm
- Low battery signal – Alerts user when the battery needs to be replaced
- Green LED – Flashes every 30-seconds to indicate the unit is operating properly
- Red LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound
First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Hardwired with Battery Backup, BRK SC7010B
- Keep your family safe with this hardwired smoke and carbon monoxide alarm
- the battery backup means constant monitoring, even if there’s a power failure
- Features electrochemical Carbon Monoxide sensing technology as well as a photoelectric sensor equipped with Optipath 360 technology that enhances detection with 360-degree access and reliably detects smoke from smoldering fires
- In case of danger, the loud spread-spectrum alarm is designed to be heard easily by even those with some hearing issues
- Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
- 10-year limited warranty
- equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for your safety
- Rigorously tested to meet UL standards
Product Description
The First Alert BRK SC7010B Hardwired Smoke and Carbon Monoxide Alarm includes a battery backup so that it keeps monitoring safety even if there’s a power failure. It’s designed for residential use as well as for institutional locations such as hospitals, hotels, dorms, and multiple-family dwellings. This alarm is interconnectable and can be linked with up to 18 compatible devices (up to 12 smoke alarms and 6 compatible devices like bells, horns, and repeaters) so that when one triggers, all alarms sound. This alarm emits a loud, spread-spectrum 85-decibel alarm designed to be heard even by those with some hearing issues. In addition to electrochemical CO-sensing technology, the detector also features a photoelectric smoke sensor that can help detect slow smoldering fires. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke or carbon monoxide. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Hook up to AC power with the “quick-connect” wiring harness for easy installation.
From the Manufacturer
The BRK Model No. SC7010B is a wire-in, 120V AC 60Hz single and/or multiple station combination smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Model SC7010B complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC photoelectric smoke and carbon monoxide alarms are required. The BRK SC7010B is a state-of-the-art hardwired with battery backup smoke/CO combo alarm that features a photoelectric smoke sensing chamber, an electrochemical CO sensor and an End of Life signal. The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for the elderly with normal age related hearing loss to hear the horn. This alarm features two latching features and two silence features. Alarm Latch: Easily identifies initiating alarm even after alarm condition has subsided. Low Battery Latch: Identifies which unit is in low battery condition by blinking the green power light. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. Other features include an 85dB horn, single button test/silence, an easy access battery drawer and dust cover. OptiPath 360 Technology: Exclusive patented technology provides 360 degrees of direct access to the smoke sensor. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a Quick-Connect wiring harness. Installation is quick, easy and cost effective.
Kidde Worry-Free 120V Hardwired Smoke & Carbon Monoxide Detector Alarm with Lithium Battery Backup | Model I12010SCO
- Provides Protection from Two Hazards – Fire and CO in one unit with 10-year sealed lithium battery backup.
- Sealed-In Lithium Battery Backup – No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
- Voice Warning System – Verbally announces “FIRE!” or “WARNING! CARBON MONOXIDE” to help distinguish between threats. Audio Alarm: 85 dB at 10 feet
- Ionization Sensing Technology – Ideal for detecting fast flaming and other types of fires. Temperature Range : 40 degree F (4.4 degree C) to 100 degree F (37.8 degree C)
- Hush Feature – Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.Interconnects – Up to 24 Kidde devices (of which 18 can be initiating).Flashes once every 60 seconds to indicate battery only mode
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor – which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires – with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm’s overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected CO level of 100ppm or higher since it was last reset. Humidity Range – 10%-85% non-condensing relative humidity (RH)
Kidde Worry-Free Carbon Monoxide Detector Alarm with 10 Year Sealed Battery | Model C3010
Product Description
Kidde Worry-Free, 10 Year, Sealed Battery, Carbon Monoxide Alarm, Uses Electro-Chemical Sensing Technology To Protect Families, No Battery Replacement Required Over The 10 Year Life Of The Alarm, Alarm Automatically Activates When Attached To The Mounting Bracket, Tests/Reset Button, Green LED Light Indicates Alarm Is Operating Properly, Red LED Light Indicates Dangerous Levels & Alarm Will Sound End Of Life Warning, UL Listed, 10 Year Warranty, Clam Shell. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.
Amazon.com
Kidde Worry-Free Non-Digital Carbon Monoxide Alarm
Kidde Worry-Free carbon monoxide (CO) alarms offer 10 years of continuous detection from the leading cause of accidental poisoning deaths in America – carbon monoxide. The UL-listed alarms are the first and only models to contain a 10-year sensor as well as a sealed-in lithium battery proven to power the alarm for a decade. These two state-of-the-art technologies combine to create a premier level of protection. Homeowners have peace of mind knowing their CO alarm is always on, and they never have to be hassled by low-battery chirps or battery replacement. Until now, a CO sensor operated for five to seven years, based on the manufacturer. The Worry-Free alarms last nearly twice as long as the average model.
Long-Life Sealed Lithium Battery: Why It’s Needed
Each year, fire departments respond to an average of 72,000 CO poisoning incidents, according to the National Fire Protection Association. Known as the ‘silent killer,’ carbon monoxide is odorless, tasteless and invisible. The only safe way to detect it is with a working CO alarm. Industry surveys find approximately half of U.S. homes have a carbon monoxide alarm installed, most of those are battery-operated. A recent survey conducted on behalf of Kidde, found homeowners’ number one fire safety complaint is a low battery chirp.
Worry Free Benefits
The C3010 carbon monoxide detection unit provides one decade of protection; the sealed lithium batter provides 10 years of continuous power. It is also both maintenance-free and hassle-free; never replace a battery during the alarm’s operating life and no need to worry about the batteries being removed. Additionally, this Worry Free unit is the longest sensor life available and is proven effective for ten years with quick and easy installation by simply sliding the alarm onto the mounted bracket which activates it automatically.
What’s in the box
One single Kidde Worry-Free Non-Digital Carbon Monoxide Alarm. A ten-year limited warranty.
Specifications
- UL Listed – tested by an independent nonprofit testing agency to ensure it meets the US standard
- 85 decibel alarm – loud enough to wake the average sleeping adult
- Nighthawk electro-chemical sensor, which is proven to be the world’s most accurate based on claims by major manufacturers
- Test-Reset Button tests the alarm circuitry and horn, resets memory after alarm has sounded
- End-of-life signal chirps every 30-45 seconds when alarm needs to be replaced – approximately 10 years after power
- Deactivation switch disables the alarm and makes the batteries safe for disposal once the unit has reached the end of its 10-year life
- Tamper resistant feature prohibits a disabled alarm from being placed back onto the mounting bracket
- 10-Year Limited Warranty lasts the life of the alarm
First Alert Carbon Monoxide Detector Alarm | Plug-In with Battery Backup, CO605
- Keep your family safe with this easy-to-use plug-in carbon monoxide alarm; it works with any standard outlet and also has a battery backup for continuous monitoring of Carbon Monoxide levels, even if there’s a power failure
- Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room
- Simple to use, with a single test/silence button; a loud 85-decibel alarm sounds when Carbon Monoxide levels reach dangerous levels. Low battery signal mute, quiets low battery signal for up to 8 hours
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- 7-year limited warranty; equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety
- All First Alert CO alarms are rigorously tested to meet UL standards. Item Length is 3.4 inch , Item Width is 1.38 inch and Item Height is 5 inch
Product Description
The First Alert CO605 Plug-In Carbon Monoxide Detector helps protect your family with an electrochemical sensor and an 85-decibel alarm, and easily plugs into any standard outlet with no additional mounting necessary. It also includes a battery backup, so CO is monitored even if there’s a power failure. One button silences any nuisance alarms, and also tests detector functions. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Keep your family safer by installing units on multiple levels and in each bedroom.
Amazon.com
Protect yourself and your family from the potentially deadly effects of carbon monoxide with the First Alert CO605 Plug-In Carbon Monoxide Alarm with Battery Backup. This easy-to-install, UL-listed alarm features advanced technology, a user-friendly design, and backup battery power to provide continual monitoring of carbon monoxide levels. It also comes complete with an “Alarm Action” chart that instructs you on what to do if the alarm sounds.
|
||||
 Smoke Alarms: 1 in every bedroom and at least 1 on every level of the home. Carbon Monoxide Alarms: 1 on every level of the home and 1 in each sleeping area. Fire Extinguishers: 1 on every level of the home and 1 each in the kitchen and garage. |
smell, or taste. View larger. |
Where does carbon monoxide come from? |
Carbon Monoxide: The Leading Cause of Accidental Deaths in the U.S.
Carbon monoxide, an invisible, odorless gas, is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until it’s too late. Because you can’t see, taste, or smell it, CO can kill you before you even know it’s there. Likewise, exposure to low levels over time can make you ill.
The Consumer Product Safety Commission recommends that every home have at least one carbon monoxide alarm with an audible warning signal–like the CO605–installed near sleeping areas. An alarm like the CO605 can detect the CO you can’t see, smell, or taste before it causes any physical harm to you or your family.
Electrochemical Technology for Accuracy and Longer Life
The CO605 uses an electrochemical carbon monoxide sensor–the most accurate CO sensor available. In comparison to more commonly available technologies, electrochemical technology is highly accurate, requires a lower amount of power, and boasts a longer life. If the CO605’s sensor detects a high concentration of CO, the unit will sound a clear, loud, 85-decibel alarm, giving you a chance to either ventilate the area or safely evacuate.
A/C Power with Battery Backup and User-Friendly Design
This unit runs on A/C power, but in case of an electrical outage, it will switch to battery operation. This gives you peace of mind during storms–when you’re more likely to use generators that could potentially give off dangerous levels of CO.
For added convenience, installation is a snap. Simply plug the CO605 into any wall outlet–with no additional mounting–and it’s ready to go. The unit features two ‘AA’ batteries to provide backup power to the monitor in the case of power disruption or outage.
Operation is equally trouble free. One button clearly labeled “Test/Silence” lets you test the unit to see if it’s running properly or silence it during a false alarm.
Continually Monitors Both CO Levels and Battery Power
To give you real peace of mind, the CO605 continually monitors CO and re-alarms if dangerous levels persist. At the same time, a low-battery signal let’s you know when it’s time to replace the backup batteries (included); a low-battery mute quiets the signal for up to eight hours. An easy, front-open compartment allows for easy battery changes without dismounting the alarm, and an end-of-life chirp lets you know when it’s time to replace the unit.
The CO605 comes with two ‘AA’ batteries and a five-year limited warranty. It also comes complete with an “Alarm Action” chart that instructs you on what to do if the alarm sounds.
What’s in the Box
Carbon monoxide alarm, two ‘AA’ batteries, and user’s manual complete with “Alarm Action” chart.
Selecting a First Alert |
 |
 |
 |
 |
 |
| Model# | CO400 | CO410 | CO600 | CO605 | CO615 |
| Details: | Battery Operated Carbon Monoxide Alarms | Plug-In Carbon Monoxide Alarms | |||
| Power Supply | 2-AA Batteries | 2-AA Batteries | 120-volt AC Plug-in | 120-volt AC Plug-in | 120-volt AC Plug-in |
| Battery Backup |  |
|
|||
| Digital Display | |
|
|||
| Single-Button Silence/Test | |
|
|
|
|
| EZ-Access Battery Compartment | |
|
|
|
|
| Low-Battery Warning/Silence | |
|
|
|
|
| Loud, 85-dB Alarm | |
|
|
|
|
| End-of-Life Timer | |
|
|
|
|
| 5-Year Limited Warranty | |
|
|
|
|
Kidde 21006406 KN-COB-IC Hardwire Carbon Monoxide Alarm with Battery Backup, Interconnectable
- Battery Pull Tab – Eliminates battery installation time and keeps battery fresh.
- Quick Connect –Installs quickly with snap-on harness.
- Sealed Cover –Reduces nuisance alarms. Sealed to protect sensor from contaminants prior to installation.
- Alkaline Battery Backup – for continuous protection in case of power failure.
- Test/Reset – Tests CO alarm circuit operation and allows you to immediately silence the alarm.
- IMPORTANT: This carbon monoxide alarm is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas
- CAUTION: Kidde (Fyrnetics/Lifesaver/Kidde/Nighthawk/Pyrene) alarms and accessories can only be interconnected with other Kidde alarms and accessories
Product Description
The Kidde 900-0120 Is An Ac Wire-In Carbon Monoxide Alarm That Warns You And Your Family Of Dangerous Carbon Monoxide Levels. It Includes Multiple Contractor Friendly Features To Ensure Easy Installation And Minimal Troubleshooting. This Alarm Interconnects With Up To 24 Kidde Devices (Of Which 18 Can Be Initiation) Including Smoke Alarms, Co Alarms And Heat Alarms On One Wiring Network. The 900-0120 Includes A 9V Battery Backup Along With A 5-Year Limited Warranty. Battery Pull Tab Made in: United States Dimensions: 2.4 X 6 X 5.9Brand: Kidde Item Weight: 0.93includes: Unit Instruction Guide
Amazon.com
Kidde’s KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup helps to provide your home with comprehensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.
|
 Kidde’s KN-COB-IC hardwire carbon monoxide alarm with battery backup is interconnectable with 23 other devices for comprehensive coverage. View larger |
Features
The KN-COB-IC is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The added benefit of being able to interconnect this unit with up to 23 other Kidde devices—such as other CO alarms, smoke detectors, and heat sensors—all on one wiring network delivers extensive protection against fire and carbon monoxide (as well as peace of mind). The 9-volt battery backup provides continuous security if the power goes out. An LED lighting system on the unit signals power levels and sourcing: The green LED is steadily on when AC power is present and will flash every 7 seconds when in battery-only mode; the red LED will flash in unison with the sounder pattern for both a smoke or CO incident, and it will flash once per 30 seconds if the alarm needs service or be steadily on if the alarm is in error mode; and the amber LED will illuminate if the unit is the originating alarm in a CO incident. This device has an expected 7-year lifespan and comes equipped with a 5-year manufacturer’s limited warranty.
What’s in the Box
One Kidde KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup.
 |
||
| The KN-COB-IC’s many user-friendly features make it easy to install and maintain. (Click to enlarge) | ||
First Alert Plug-In Carbon Monoxide Detector, CO600
- Keep your family safe with this easy-to-use plug-in carbon monoxide alarm
- it works with any standard outlet
- Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room
- A loud 85-decibel alarm sounds when Carbon Monoxide levels reach dangerous levels
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- 7-year limited warranty
- equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety
- All First Alert CO alarms are rigorously tested to meet UL standards
Product Description
The First Alert CO600 Plug-In Carbon Monoxide Detector helps protect your family with an electrochemical sensor, and easily plugs into any standard outlet with no additional mounting necessary. It features an 85-decibel alarm that sounds when CO is elevated. One button silences any nuisance alarms, and also tests detector functions. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Keep your family safer by installing units on multiple levels and in each bedroom.
Amazon.com
Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.
The First Alert CO600 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. Installation is as simple as plugging it in to any wall outlet. The test/silence button both silences a non-threatening alarm and allows you to test the unit’s functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. UL listed.–Bree Norlander
What’s in the Box
One carbon monoxide alarm and user’s manual
Conclusion
By our suggestions above, we hope that you can found Value Home Hardware Smoke And Co2 Detectors for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Value Home Hardware Smoke And Co2 Detectors, eg:
- What are Top 10 Value Home Hardware Smoke And Co2 Detectors for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Value Home Hardware Smoke And Co2 Detectors to buy?
- What are Top Rated Value Home Hardware Smoke And Co2 Detectors to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Value Home Hardware Smoke And Co2 Detectors?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Value Home Hardware Smoke And Co2 Detectors.
- Before deciding to buy any Value Home Hardware Smoke And Co2 Detectors, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Value Home Hardware Smoke And Co2 Detectors and What you should consider when buying the Value Home Hardware Smoke And Co2 Detectors and Where to Buy or Purchase the Value Home Hardware Smoke And Co2 Detectors. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Value Home Hardware Smoke And Co2 Detectors of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Value Home Hardware Smoke And Co2 Detectors.
