Best Floor Sander Dust Skirt

The DEWALT DWE6421 5″ Single-Speed Random Orbit H&L Sander features a 3.0 amp motor that spins the pad at 12,000 OPM, with a shorter height allows the user to get closer to work piece for sanding. This sander has a rubber over-mold in all of the critically areas of the sander. It also features a separate counterweight design which reduces vibration for improved comfort. An improved dust-sealed switch offers protection against dust ingestion for longer switch life, and improved dust collection and interfacing with our vacuum locking system. Also to note, for ease of use, the dust bag has one-hand locking system. Uses 5″ Hook and Loop pad. Includes: Sander, Owners Manual, Mail , Dust Bag.

The T-Rex Planetary machine is a light weight, extremely portable planetary polishing machine with the most affordable price. It is a rugged, planetary powered tool designed to produce a flat, swirl free finish on counter tops, floors and steps. The planetary polishing tool can be used to grind, hone, polish and clean concrete, terrazzo, marble and granite surfaces with diamond abrasives. This is a true planetary gear driven tool. The 10″ platform turns at a lower rate than the higher rotational speed of the 4 inch platens. This combination provides the optimal speed for diamond polishing, producing a perfect finish 5 times faster than a single head polisher. The unit is usually powered by electric variable speed grinder or polishers with a collar size of 2″ (50mm) or smaller. A center cooling water feed line, precision bearings and gears translate to sturdy construction and the ultimate tool for perfect flatness and a superior mirror like polish.

The Dust Shroud is designed for use with diamond cup wheels for floor grinding applications. The max. collar size is 1-13/16″ which fits most 4″ to 5″ hand grinders including Makita, Bosch, Dewalt and more. But it does not fit all grinders. Please check your collar size before buying.

The collar dimension of 1-13/16″ is referred to the diameter of the hole on top where it would attach to your angle grinder. In most cases, the screw on dust shroud needs to be adjusted to tighten or loosen the collar before it can be used. Just loosen the lever and then adjust the screw and work it back into place. Once you get it in place, it will stay in place nor require re-tightening during your entire project.

Outside diameter of hose connector is 1-1/4″. If it does not fit your shop vac, you can duct-tape them together.

You may purchase separately our Diamond Turbo Grinding Cup Wheel for concrete floor applications. Utilizing the lastest “Multilayer Vacuum Brazed Technology” the cup wheels are super aggressive and long lasting and thus become the top quality in the markets.

We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing.

Product Description

The D1835 DustBuddie by Dustless Technologies is your solution to dust storms created when grinding concrete. A universal, pivoting mount allows it to attach to nearly any 4″-5″ grinder and contours to your grinding movements. Bristles along the bottom create a seal for maximum suction. For grinding close to walls, the front is removable to allow for close work. An included 18 inch hose provides adaptation to most standard wet/dry vacuums. Works best and complies with EPA laws and OSHA guilelines when used with a Dustless Technologies D1606 Wet/Dry Vacuum. To see if your grinder is compatible with the DustBuddie, contact us at www.dustlesstools.com/blog/contact-us/. Includes (1) 5″ DustBuddie, (1) 18″ adapter hose, (3) spacers for correct positioning, and (1) releasable tie for keeping the vacuum hose out of the way.

Amazon.com

The Dustless Technologies D1835 DustBuddie Dust Shroud captures up to 99% of the dust created by a hand grinder–before it escapes into the air. Designed to be used with the Dustless Wet Dry Vacuum, this dust control shroud fits most hand grinders and is quick and easy to install. With its brush skirt, adjustable height, and removable front lip, the DustBuddie performs smoothly and accurately.

Protects Workers’ Health and Eliminates Cleanup
The DustBuddie Dust Shroud helps protect workers’ health and saves time and money on cleanup. The DustBuddie has a strategically placed port that attaches to the Dustless Wet Dry Vacuum, which is specifically designed to capture extremely fine dust before it enters your environment.

Fits Most Grinders
The DustBuddie Dust Shroud fits most four-to-five-inch hand grinders, including Makita, Bosch, DeWalt, and more. Three adjustable spring screws control the height of the DustBuddie, so you can quickly accommodate different grinding wheels and discs. Simply remove the existing guard from the grinder, slip on the DustBuddie, tighten the band clamp, adjust the height, and you’re ready to start your work.

Efficient and Accurate Grinding
The DustBuddie Dust Shroud is designed to make your work easier and more manageable. Made of durable, clear polycarbonate for visibility, the shroud rides on a spring cushion, keeping the grinder flat so that dust won’t escape. A short brush skirt improves lateral motion for grinding on uneven or textured surfaces.

For further convenience, the shroud’s front lip slides out so you can use the device against a wall. The front lip will easily snap back into place for a quick return to work. And if you’re performing tuck pointing, decorative concrete cutting, or crack chasing, you can add an optional cover plate to help get the job done.

What’s in the Box
Dustless Technologies D1835 DustBuddie Dust Shroud; hose clamp; and band clamp.

See all Product description