The Best Co2 Tank Refill For Kegerator Kit

This direct draw kit includes everything you need to pressurize and tap a D system keg. It’s the perfect addition to a commercial kegerator that does not include the dispense components, and can be paired with a jumper line to connect to and serve from a jockey box. It includes a brand new 5 lb. aluminum CO2 tank with a glossy red, corrosion-resistant epoxy finish (empty), commercial grade double gauge regulator, US lever handle D system keg coupler, 5′ air line assembly (5 feet of 5/16″ blue air tubing and two plastic air line clamps), and neoprene washer.

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125″ UNF inlet thread.
All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

✹Double Gauge Mixed Gas Regulator have regulator rubber Protector Boot(2pc).
✹To prevent bumps and scratch the dial ensure accuracy and beauty.
Specification:
– 0-60 PSI Working Pressure,
– 0-3000 PSI Tank Pressure.
– Better Design of Safety Pressure Relief Valve springs (Inside instead of Outside) also have higher fatigue strength and durability.
– GA 320 CO2 Pressure Regulator light weight,All you need to install this is an adjustable wrench.
– Each CO2 Beer Regulator Pressure Kegerator is supplied with 2 O-ring washers (One installed inside and the other tied onto the Regulator.

Please Note: All aluminum CO2 cylinders are sourced from several manufacturers. As a result, the cylinder you receive may have a brushed dome or unfinished dome. We apologize, but we are unable to take special requests at this time.

If you want to set up a draft dispensing system, you need a dependable CO2 tank to provide the appropriate amount of pressure for your lines. This CO2 cylinder is produced from high strength aluminum alloy that is lighter than steel and doesn’t rust. Remember, the tank must be used in a fully upright position, so do not tilt it or lay it on its side. It’s easy to fill; just check out your local listings under “Gas,” or try local fire extinguisher supply or welding supply companies. *Please note: Due to Federal regulations, we cannot ship this tank filled. In other words, when you receive this tank it will be EMPTY.*. In stock and ready to ship. Features: Made of high quality aluminum with a brushed body and unpainted dome. Stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings. . Specs: Dimensions: 5 1/4″D x 18″H. Tare Weight: 7.7 lb. Holds 5 lb of gas. Capacity: 6 – 8 half kegs. Service Pressure: 1800 PSI / 124 BAR. Test Pressure: 3000 PSI / 207 BAR. CGA 320 valve. Shipping: Tanks shipped EMPTY. We can not ship these, or any other tank filled.

The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

Designed for applications where one keg of beer or kombucha will be dispensed at a time, Kegco’s LHU51 Elite Series Single Gauge CO2 Draft Beer Regulator features a single 5/16″ barb and a single gauge that indicates how much CO2 pressure is inside of the keg. The regulator’s sophisticated design boasts a bold black gauge with high-contrast red and white text that is both stylish and easy to read, and a matching black plastic handle and black shut-off knob add to the sleek look. The large ergonomic adjustment knob gives you the power to make precise pressure adjustments with ease, between 0-60 PSI. This regulator also features a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI to ensure safety, as well as a built-in tank washer that delivers leak-free performance. Constructed from sturdy chrome-plated brass, this regulator has a sintered metal filter built into the stem to keep harmful contaminants out of the regulator, ensuring long-lasting efficiency. A dependable rubber boot on the pressure gauge also helps protect the regulator from damage.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Co2 Tank Refill For Kegerator Kit, eg:

• What are Top 10 Co2 Tank Refill For Kegerator Kit for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Co2 Tank Refill For Kegerator Kit to buy?
• What are Top Rated Co2 Tank Refill For Kegerator Kit to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Co2 Tank Refill For Kegerator Kit?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Co2 Tank Refill For Kegerator Kit.
• Before deciding to buy any Co2 Tank Refill For Kegerator Kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Co2 Tank Refill For Kegerator Kit and What you should consider when buying the Co2 Tank Refill For Kegerator Kit and Where to Buy or Purchase the Co2 Tank Refill For Kegerator Kit. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Co2 Tank Refill For Kegerator Kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Co2 Tank Refill For Kegerator Kit.