Top 10 10 2 Wire For Dryer

Finding your suitable readers for 10 2 wire for dryer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 10 2 wire for dryer including detail information and customer reviews. Let’s find out which is your favorite one.
947 reviews analysed
OAONAN GFCI Replacement Plug Assembly 2-Prongs with Ground Fault Circuit Interrupter Safety RCD Protection for Pool Pump,Power Pressure Washer,Air Conditioner,Hair Dryer and so on (10Amp 2-wires)
- 【Easy to Install】Ground fault circuit interrupter with surge protection
- 【Safety Leakproof】Replacing your general plug of power tool with this GFCI Plug, to protect you from electric shock
- 【Durable】ETL listed,rugged design and construction, built to withstand heavy use
- 【Clear Instructions】Power indicator lamp goes OFF if GFCI trips, power is interrupted or GFCI is unplugged
- 【Widely Use】Replacement GFCI plug unit for washing machine, air conditioner,hair Dryer,other electrical appliances
Flexible Clothes Dryer Duct – 10 Foot by 4 Inch | Includes 2 Premium Screw Clamps
- 4″ x 10′ FLEXIBLE Aluminum Duct Compatible with front-load and top-load dryers.
- EASY TO INSTALL for contractors or homeowners. Suitable for gas dryer or electric dryer applications.
- UNIVERSALLY COMPATIBLE with Dryers from Whirlpool, Samsung, LG, GE, Kenmore, Bosch, Maytag, Amana, Electrolux, Speed Queen and more.
- FIRE RESISTANT DRYER DUCT – Forms a tight seal to direct fumes and humidity safely away from living spaces. MULTI-PLY Aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix – constructed to replace inferior vinyl ducts.
- KIT INCLUDES: Two premium 4 inch worm hose clamps for a secure connection to wall and rear of dryer. Upgraded clamps ensure a superior dryer vent hose connection that won’t fail.
Flexible Dryer Hose with 2 enhanced worm clamps – 10 Feet when full extended
Cable Matters 3 Prong Dryer Cord, 30 Amp Appliance Cord (NEMA 10-30P to 3-Wire) – 10 Feet
- DRYER POWER CORD 3 prong fits a standard 30A 3 wire dryer cord outlet
- 3-prong 30A 10-30R outlets are commonly found in an older building or homes built before 1996
- Purchase a longer replacement 3 prong cord to move your dryer to a nearby location
- 3 WIRE DRYER CORD with a 30A NEMA 10-30 plug fits older and most newer dryer models
- Purchase new 3 wire dryer cords for dryers that are often sold without the power cord
- HEAVY DUTY 10 GAUGE 240V dryer cord 3 prong with 10 3 wire copper conductors is compatible with a 30 amp 240V clothes dryer outlet
- SDRT cable jacket on the electric dryer cord incorporates insulated thermoplastic construction
- Supports up to 300V and 140F to prevent overheating
- RUGGED & SAFE with a right-angle dryer plug 3 prong that connects securely into the outlet
- 30A 10-30 plug has side grips to assist in unplugging when necessary
- Ring terminals provide an easy installation and a secure connection
- Strain relief brackets support the weight of the cord at the dryer end
- ELECTRIC DRYER POWER CORD is compatible with older model dryers and many new models that accept a 3 wire cord
- A lifetime warranty and product support provides peace of mind when purchasing this 3 prong power cord
Southwire 63948422 50′ 10/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange
- Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
- Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
- UL Listed type NM-B
- 10 gauge, 3 conductors with ground, 50′ per coil
- Made in America
For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
10/2 UF-B Wire, Underground Feeder and Direct Earth Burial Cable (150ft Cut)
- #10 AWG Wire with Annealed (Soft) Copper (Cu) Conductors
- Used Indoor for Wet or Corrosive Locations, Resistant to Light and Moisture
- Used Outdoor for Direct Earth Burial, Resistant to Sunlight, Moisture and Fungus
- Has a Heat Capacity of 90 Degrees Celcius and is Rated for 600-Volts, Has an Allowable Ampacity of 30 Amps
- Color of Wire May not be the Same as the Picture Shown.
Applications:
UF-B is an underground feeder and branch circuit wiring cable. It can be used as an underground feeder from an existing building to outdoor lighting fixtures, pumps, outbuildings and other equipment. Its applications are outlined in Article 340 NEC 2008 and NEC 2011. UF-B is rated at 600 volts. Although it is rated at a conductor temperature of 90ºC dry / wet, its ampacity is limited to 60ºC according to the NEC 2008 AND NEC 2011. UF-B may be directly buried or installed where exposed to sunlight. When used as an NM cable it must comply with the requirements in NEC 2008 and NEC 2011 Article 334.
Standards:
ASTM – B3 and B-8
UL Standard 83
UL Standard 493
Federal Specification A-A-59544
National Electrical Code, NFPA 70, 2011 Edition
RoHS/REACH
Construction:
Insulation: Polyvinyl Chloride (PVC) with a nylon covering. Color coded phase identification.
Jacket:Sunlight, moisture and fungus resistant gray PVC.
Specifications:
Size:10 AWG
Number of Conductors:2
PVC Insulation Thickness:0.024 inches
Ground Wire Size:10 AWG
Nylon Thickness:0.004 inches
Nominal Cable Dimensions:0.518 inches x 0.215 inches
Weight per Foot: 0.178 lbs
Allowable Ampacity: 33 Amps
Southwire 13056722 10/2WG UF Wire 50-Foot
Product Description
Type THHN insulation, rated 90 degrees Celsius, 600 volt. Gray PVC jacket. For applications of direct burial, dwellings not exceeding 3 floors above grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry, and corrosive locations, general branch circuit wiring and new wiring or replacement wiring. Flame retardant, moisture, fungus, and corrosion resistant. Sunlight resistant jacket. JC-30B Federal specification, ASTM B-3, ASTM B-8 and NY state DOS 16120-880923-2002. UL Listed.
From the Manufacturer
For applications of direct burial, dwellings not exceeding 3 floors above grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry, and corrosive locations, general branch circuit wiring and new wiring or replacement wiring. Flame retardant, moisture, fungus, and corrosion resistant. Sunlight resistant jacket. JC-30B Federal specification, ASTM B-3, ASTM B-8 and NY state DOS 16120-880923-2002. U.L. Listed. /2 = 2 insulated wires with bare ground. /3 = 3 insulated wires with bare ground.
OAONAN GFCI Replacement Plug Assembly 2-Prongs with Ground Fault Circuit Interrupter Safety RCD Protection for Pool Pump,Power Pressure Washer,Air Conditioner,Hair Dryer and so on (15Amp 2-wires)
- 【Easy to Install】Ground fault circuit interrupter with surge protection
- 【Safety Leakproof】Replacing your general plug of power tool with this GFCI Plug, to protect you from electric shock
- 【Durable】ETL listed,rugged design and construction, built to withstand heavy use
- 【Clear Instructions】Power indicator lamp goes OFF if GFCI trips, power is interrupted or GFCI is unplugged
- 【Widely Use】Replacement GFCI plug unit for washing machine, air conditioner,hair Dryer,other electrical appliances
This attachable safety GFCI Plug earth leakage protection device is widely used to replace the general PLUG of your power tools and home appliances, such as pressure washer, hair blower, hairdryer, vacuum cleaner, air conditioner, bathroom heater, aqaurium, pool pump and all the Christmas cords that plug into each other. It will trip off when it detect current loss, to protect people from electric shock.
How to use?
(1) Cut off the original electrical plug and wired up this GFCI plug.
(2) Place the Hot wire and the Neutral wire under the matched screw.
(3) Install the strain-relief clamp (the u-shaped piece of metal) over the outer cable exterior to help prevent a pulling force from pulling the wires out from the screws that are supplying the electricity
(4) Test it and make sure the red indicator light is ON before using.
How to test? (1) Power on
(2) Press RESET button, red indicator light ON
(3) Press TEST button, red indicator light OFF
(4) Done!
Specifications
Name: Replacement GFCI Plug 2-Prongs
Rated Voltage: 125VAC, 60Hz
Rated Current: 15Amp
Residual Current: 5mA
Tripping Time: ≤0.1ms
Voltage Withstand: 2000V
Endurance Test Time: 6000
Limited Current: 250A
Color: Black
Certificate: ETL
Southwire 28829021 25′ 10/2with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange
- Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
- Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
- UL Listed type NM-B
- 10 gauge, 2 conductors with ground, 25′ per coil
- Made in America
For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
10/2 NM-B x 75′ Non-Metallic Electrical Cable
10/2 NM-B x 75′ Non-Metallic Electrical Cable. Your order will be cut from a 1000′ master reel of this wire. As such, individual, manufacturer’s retail packaging will not be provided. Buy with confidence, as we weigh and compare each order to ensure lengths are accurate.
10/2 NM-B, Non-Mettallic, Sheathed Cable, Residential Indoor Wire, Equivalent to Romex (100FT Cut)
- 100% PVC
- #10 AWG Residential Wire for Outlets, Switches and Other Loads
- Copper (Cu) Conductors
- For Dry Locations up to 90 degrees Celsius or 194 degrees Farenheit. For Exposed and Concealed Applications.
- 600-Volt Maximum with an Allowable Ampacity of 30 Amps
- Equivalent to Romex NM-B – Color of Wire May not be the Same as the Picture Shown.
Applications:
Non-metallic sheathed NM-B cable is used in normally dry installations in residential wiring, as branch circuits for outlets, lighting and other residential loads. Its applications are outlined in NEC 2008 and NEC 2011 Article 334. NM-B is rated at 600 volts and although it is rated at a conductor temperature of 90°C dry , its ampacity is limited to 60°C according to the NEC 2008 and NEC 2011. It may be fished through masonry or tile walls, where not exposed or subject to excessive moisture or dampness. NM-B cables are LEAD FREE and RoHS compliant. Equivalent to Romex NM-B.
Standards:
Meets or exceeds all applicable ASTM specifications
UL Standard 83: Thermoplastic Insulated Wires and Cables
UL Standard 719: Non-Metallic Cables
Federal Specification A-A-59544 and requirements of the NEC
Voltage rating – 600 volts
Construction:
Insulation:Color coded polyvinyl chloride (PVC) compound with a nylon covering meeting the required thickness of Type THHN. Conductor insulation is rated 90℃C
Sheath:30 mil color coded PVC sheath rated 90℃C is applied over the completed assembly
Specifications:
Size:10 AWG
Number of Conductors:3
PVC Insulation Thickness:0.76 mm / 0.029 inches
Ground Wire Size:10 AWG
Nylon Thickness:0.13 mm / 0.005 inches
Nominal Cable Dimensions: 14.2 mm x 0.55 inches
Weight per Foot: 0.254 lbs
Allowable Ampacity: 30 Amps
Conclusion
By our suggestions above, we hope that you can found 10 2 Wire For Dryer for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 10 2 Wire For Dryer, eg:
- What are Top 10 10 2 Wire For Dryer for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 10 2 Wire For Dryer to buy?
- What are Top Rated 10 2 Wire For Dryer to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 10 2 Wire For Dryer?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 10 2 Wire For Dryer.
- Before deciding to buy any 10 2 Wire For Dryer, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 10 2 Wire For Dryer and What you should consider when buying the 10 2 Wire For Dryer and Where to Buy or Purchase the 10 2 Wire For Dryer. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 10 2 Wire For Dryer of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 10 2 Wire For Dryer.