Top 9 Dremel 409 Disks
Finding your suitable readers for dremel 409 disks is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dremel 409 disks including detail information and customer reviews. Let’s find out which is your favorite one.
689 reviews analysed
Dremel 409 Cut-off Wheels .025" thick, 36 Pack
Product Description
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
From the Manufacturer
A cutting disc made of a hard abrasive with a diameter of 15/16″ (23.8 mm) and a width of 0.025″ (0.64 mm) 36 per package. Ideal for cutting, grooving and trimming all kinds of materials–including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
Dremel 420 Heavy Duty Cut-Off Wheels .040" thick, 20 Pack
Product Description
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
Amazon.com
The Dremel 15/16-Inch Heavy Duty Cut-Off Wheel is ideal for cutting, grooving and trimming all kinds of metal. It can also used on other materials, including thin wood, plastics and ceramics. This cutting disc is constructed from a hard abrasive used for slicing and cutting metal including hardened steel. This wheel makes it easy to cut bolts and screws, and make slots in rusted or stripped bolts and screws for removal with a screwdriver. This 1/2-inch thick polishing wheel comes in a pack of 20.
Dremel 409 Cut Off Wheel
cut off wheels dremel
Dremel 426 Fiberglass Reinforced Cut-Off Wheels 1- 1/4" Dia., .045" Thick
Product description
A cutting disc made of a hard abrasive and reinforced with fiberglass. It is 0.045″ (1.2 mm) thick with a diameter of 1 1/4″ (32.0 mm) 5 per package. Ideal for cutting, grooving and trimming all kinds of materials–including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
From the Manufacturer
A cutting disc made of a hard abrasive and reinforced with fiberglass. It is 0.045″ (1.2 mm) thick with a diameter of 1 1/4″ (32.0 mm) 5 per package. Ideal for cutting, grooving and trimming all kinds of materials–including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel – 10 Pack
- Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics.
- Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
- May also be used on other materials including thin wood, plastics and ceramics.
Product description
2615-4914 Features: -Dremel’s biggest Cut-off Wheel allows you to cut more than ever before. -It is made of a hard abrasive and reinforced with fiberglass for extra strength. -The 1-1/2” Cut-off Wheel is designed to be used with a washer set that provides extra support. -Ideal for cutting, grooving and trimming all kinds of materials including metal, wood and ceramics. Product Type: -Coated Abrasives/Cut Off Wheel. Dimensions: Overall Product Weight: -0.07 Pounds.
From the Manufacturer
A 1-1/2″ diameter cutting disc made of a hard abrasive and reinforced with fiberglass for slicing and cutting metal including hardened steel. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. The cut-off wheel cuts only along its edge.
TEMO 100pc 1-1/2 inch (38mm) Reinforced Fiberglass Cutoff Wheel Disc with two 1/8 inch (3.2mm) Mandrel, fit Dremel and Compatible Rotary Tools
- Packaged 100pc 1 1/12″ (27.52mm) inch Fiberglass Reinforced Cutoff Wheels
- Each disc is fiberglass reinforced for strength and longer life than normal cutoff discs.
- middle holes is 2mm; Thicknesses 0.05″; For use with Dremel Rotary Tools. 2 compatible 1/8″ (3.175mm) mandrel included
- For use with Dremel Rotary Tools. Max speed 15,000 rpm.
- A sampling showed thicknesses ranging from about 0.048 to 0.065 inches
TEMO 100pc 1-1/2 inch (38mm) Reinforced Fiberglass Cutoff Wheel Disc with two 1/8 inch (3.2mm) Mandrel, fit Dremel and Compatible Rotary Tools
- Packaged 100pc 1 1/12″ (27.52mm) inch Fiberglass Reinforced Cutoff Wheels
- Each disc is fiberglass reinforced for strength and longer life than normal cutoff discs.
- middle holes is 2mm; Thicknesses 0.05″; For use with Dremel Rotary Tools. 2 compatible 1/8″ (3.175mm) mandrel included
- For use with Dremel Rotary Tools. Max speed 15,000 rpm.
- A sampling showed thicknesses ranging from about 0.048 to 0.065 inches
Please visit completed TEMO product line at our store front at: www.amazon.com/temo
TEMO is a registered trademark of Golden Coulee, LLC and Golden Coulee is the sole authorized seller of TEMO brand products. Counterfeit products may be unsafe, not made to the correct safety standards, and may be of poor quality. Golden Coulee reserves the right to pursue unauthorized use of the TEMO trademark to the fullest extent of the law.
Dremel 426B 20 Piece 1-1/4-Inch Reinforced Rotary Tool Cut-Off Wheels
- Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics
- Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver
- May also be used on other materials including thin wood, plastics and ceramics
Product Description
The 426B cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
From the Manufacturer
The 426B cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
:Dremel 420 Cut Off Wheel, 3 pack/60 pcs.
Sold as 3 UNITS at $8.46 per unit. (1 unit = Pk/20.) 15/16″ dia., .025″ thick. Use on groove and trim metals, woods and ceramics. Cuts screws and rusted bolts. Heavy duty emery. Use with mandrel No. 402 (SKU #23892). Carded. Manufacturer number: 420. SKU #: 28984. Country of origin: Taiwan. Distributed by Dremel Mfg Co.
Cutting Discs for Dremel Rotary Tool, 1/8" Shank Mini Diamond Cutting Wheel and HSS Circular Saw Blades and Resin Metal Cutting Wheels Tools Wood Metal Stone Cutting
- ★ GREAT TOOL FOR DIY – These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to test this accessory kit. And the mandrels fit for most power die grinders or rotary tools & air tools.
- ★ 10 Pcs RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.
- ★ 6 Pcs HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.
- ★ 10 Pcs DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.
- ★ ★ QUALITY WARRENTY – We provides 3 months quality guarantee and lifetime after-sale service for every customer. We believe in our cutting wheels for rotary tool and we value our reputation as a expert. If YOU have any problems, please feel free to contact our customer services team, solutions would be within 24hours.
Conclusion
By our suggestions above, we hope that you can found Dremel 409 Disks for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Dremel 409 Disks, eg:
- What are Top 10 Dremel 409 Disks for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Dremel 409 Disks to buy?
- What are Top Rated Dremel 409 Disks to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dremel 409 Disks?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dremel 409 Disks.
- Before deciding to buy any Dremel 409 Disks, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Dremel 409 Disks and What you should consider when buying the Dremel 409 Disks and Where to Buy or Purchase the Dremel 409 Disks. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Dremel 409 Disks of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dremel 409 Disks.
