Best Digital Readout For Planer

Product description

Replace the inaccurate stock height gauge on your portable planer and stop constantly using calipers to check stock thickness! Most digital calipers only read out in decimal measurements, forcing you to do the mental math to convert to fractions. If your stock is measuring .575″ and you need 9/16″, how much do you need to remove with your next pass through the planer? With the Digital Planer Height Gauge simply lower your planer until the gauge reads .565 – 9/16. It can’t get any easier! Unique gauge reads out both decimal and fractional measurements. Fits most portable “lunch box” style planers. Easy to follow installation instructions.

From the Manufacturer

This precision gauge has an angled display for easy viewing as well as “auto shut off.” And it fits most portable woodworking planers. It easily mounts to Dewalt, Delta, Ridgid, Ryobi, Makita, Craftsman, and others. It mounts in minutes and is calibrated in seconds. It displays the thickness of the wood coming out the back of the planer in inches with fractions or millimeters. It is easy to attach the WR510 to your portable planer. It comes with simple mounting brackets and detailed instructions that allow you to mount this on many models without even drilling a single hole. Calibration takes only seconds with its patented calibration system. The WR510 uses a piece of freshly planed board to ensure the readout displays the exact thickness of wood coming out the back of your planer. The large easy to read display reads in inches with fractions or millimeters. The fractions are displayed using “Precise Fraction Technology” which gives you 4 times the accuracy of other fraction readouts. The decimal inches are displayed in .005-inch increments, the fractions in 1/32-inch, and the millimeters in .1mm increments. Accuracy is .0025 decimal inches, 1/500 fraction inches, and .05mm metric. Once it is set up and calibrated, the WR510 consistently displays the thickness of wood coming out the back of your planer. It never needs re-calibrated unless the battery is replaced or the blades get worn down. Advanced features let you zero the blade, remove a precise amount of material, or measure the thickness of any board.

Product description

Get easy digital readouts of saw fence positions between 0″ and 60″. Two joinable metal tracks mount to round and rectangular fence rails and can be set up to measure on the right or left of the fence. Included peel-and-stick sensor strips mount to the tracks with adhesive backing and supply the sliding readout unit with positional data. Digital readout displays measurements in decimal and fractional inches or millimeters. Mounting bracket, hardware and alignment gauge included. Features: Works with most popular brands and styles of fences including Biesemeyer, Powermatic, Jet, HTC, General, Steel City, Delta Unifence, Dewalt, Vega and more Now uses AAA Batteries for operation (not included). Provides up to 2 years of battery life. Memory retains calibration even when OFF

From the Manufacturer

This easy-to-install Wixey WR700 Saw Fence Digital Readout kit comes with all the mounting hardware needed to retrofit Biesemeyer, Delta, Vega, General, Ryobi, Ridgid, Jet, Powermatic, and almost any other round rail or rectangular rail fence. As in other Wixey digital readouts the full function display measures in inches with fractions or millimeters. It has both absolute and incremental measuring modes and retains the calibrated setting even when turned off. The unit can be calibrated to either the left or right side of the blade and the auto shut off function preserves the battery. The WR700 has a resolution of .005”, 1/32”, or 0.1mm along with an accuracy of .002” per ft. of measuring length and a repeatability of +/-.0025”. It utilizes the patent pending “Precise Fraction Technology” used in many Wixey products which gives the displayed fractions an accuracy of 1/500” (.002”). The WR700 comes with 63” of track which is attached to the bottom of the existing fence rail using the supplied self threading screws and drill bits. The digital readout can be attached to either the left or right side of the fence and attaches using a unique magnet system which allows the fence to be removed leaving the readout in place and calibrated at all times.

The Wixey WR25 Mini Digital Height Gauge is a Light Weight, Easy to Use Gauge for all Types of Wood Working Applications. Use this Gauge for Setting Saw Blade and Router Bit Heights as Well as Positioning Fences on Router Tables and Band Saws. The Large Easy to Read Display Reads in Inches with Fractions or Millimeters. The Fractions are Displayed Using Precise Fraction Technology which Gives you 4 Times The Accuracy of Other Fraction Readouts. The Decimal Inches are Displayed in .002-Inch Increments and The Millimeters in .1mm Increments. The Accuracy and Repeatability Are .004-Inch (.1mm)