Best Bunn Tying Machine For Sale

Steps of Operation:
1. Watch the vedio linked below. https://www.youtube.com/watch?v=lbYEq0qMV6o
2. Hold handle and press down with force, when you hear a voice of “da”, press little bit further and you will hear a voice ”da” again, the tape is attached by hook, loose handle to take out the tape, pay attention that you can’t use an excessive force.
3. The branch of plant needs to bind overlap from support / line and other materials, and tie both them with the tape, and quickly press down the handle by force.
4. After cut the adhesive tape off you should loose the handle quickly and make redundant small tape to spring out.
5. Attention: Tape bound should be parallel with nail groove.

Maintenance Method:
1. If the tying hand machine of the blade is not able to cut the belt, please use a long flat nose plier to pull out the used blade, and change a new one.
2. When the staple in the hand tying machine is blocked, you can use nipper or small screw driver to get it out. (If 1 long section staple break into 2 section, we also can use one by one section to avoid be blocked.)
3. Add lubricant oil to every joint if tool binder machine are long time using.

Specification:
Item Type: Garden Tape Tool
Material: Manganese Steel
Item Color: As Pictures Shown
Item Size: Approx. 34.3 cm / 13.5 inch
Package Weight: Approx. 680 g / 23.9 oz

Package Include:
1 * Plant typing mahcine
10 * Rolls of tape
1* Box of staple
1 * Manual

With BUNN Speed Brew Technology, making great tasting coffee is not only fast, but simple. After the one time initial set-up process, simply add your favorite coffee to the filter basket, pour in fresh water, close the lid and the coffeemaker begins to brew immediately. The secret is that BUNN Speed/Velocity Brew home coffeemakers feature a stainless steel water tank that is always on and ready to brew hot coffee on demand. In fact, they brew a 10-cup pot of coffee in about three minutes. That’s fast!

Specification:

– Color: Orange

– Material: Plastic + Metal

– Voltage: 12V

– Battery: 12V Lithium Ion Batteries

– Battery Capacity: 13200 Mah

– Battery Charging Time: 1.5 hours full filling

– Tying Wire Diameter: 0.8mm

– Tying Wire Length: more than 110 m

– Applicable Scope Of Steel Strapping: 30 mm – 60 mm

– Knot Wire Length: 40cm and above

– Knot Number Per Charge: 3000 times

– Knot The Required Time: 0.8 seconds at a time

– Cable Length: 95cm / 37.40”(appr.)

– Machine Size: 290 mm * 65 mm * 195 mm / 11.42”x2.56”x7.68”(appr.)

Operation Instruction

1. The rebar tirer’s jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.

Note: There can be no barrier between the mouth of the jaws and the wire.

2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)

Note: Press one button at a time, do not probe the jaws at work.

3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.

4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.

Maintenance:

1. Clean the machine regularly, keep the wire mouth clean.

2. This product can not be placed randomly, so as not to cause damage to parts.

3. Batteries must not be placed together with other metal objects to avoid short circuit.

4. Non-professional do not disassemble the machine arbitrarily, lest cause damage.

5. When you encounter an unresolved failure, please give it to the professional repair.

Package included:

– 1X Tying Machine

– 1X Pliers

– 1X Charger

– 1X User Manual

– 2X Lithium Ion Batteries

Products shipped by US warehouse