Top 10 Dryer Parts In Houston

The 3406107 door switch may need to be replaced if you find that the dryer is not starting, will not shut off, or the door will not close properly. All you need for this repair is a putty knife and a Phillips screwdriver. Pry open the top of the dryer, remove the two screws underneath the lint collector without removing the entire thing, unplug the switch, remove the screws that hold the switch place, take out the old switch, and install the new one by screwing it back into place.

Door and strike latch kit for dryer doors. This is not a Whirlpool OEM product. The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Detailed Information:

The 279640 dryer idler pulley, also known as a dryer belt tension pulley wheel, keeps the dryer drive belt under tension as the belt wraps around the dryer drum. This part maintains the right amount of tension for the belt to rotate the drum. Common symptoms of a bad dryer pulley are: does not rotate, no start, squealing noises, the drum rotates intermittently but clunks.

Works with the following models: Whirlpool MGDE400XW, Whirlpool MGDZ600TW, Whirlpool WED8300SW0, Whirlpool WED8300SW1, Whirlpool WED9050XW, Whirlpool WED9150WW, Whirlpool WED9200SQ0, Whirlpool WED9250WL, Whirlpool WED9250WW, Whirlpool WGD8300SW1 and more.

Replaces the following part numbers: 279640, 279640VP, 2958, 3388672, 697692, AP3094197, ER279640, W10468057.

Exact replacement for majority of name brands: Kenmore, Whirlpool, Maytag, KitchenAid, Crosley, Inglis, Admiral, Amana.

Resolves the following issues:
Squeals.
Does not rotate.
Will Not Start.
Drum rotates intermittently but clunks.
Buy today and get your dryer back to working order. Click “Add to Cart” now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. This warranty is limited to the original purchaser, and is not transferable to subsequent owners of the product unless sold through an authorized re-seller. DR Quality Products is the only authorized seller.

SPECIFICATIONS:

The 3392519 Dryer Thermal Fuse replacement part by PartsBroz is engineered for use in dryers. This fuse acts as a safety device that stops the flow of electricity to the heating element (or heater coil) when dryer overheats. When this fuse trips or becomes faulty, your dryer will not start or it won’t heat properly. This is a one time fuse and cannot be re-set. It must be replaced when there is no continuity between its terminals. It’s very simple to test the fuse for continuity if you have an ohmmeter or a multimeter and are familiar with how to use it. Because the fuse is so inexpensive, many people that do not have a meter opt out to simply replace it instead based on the symptoms. For example, if your dryer is too noisy, this fuse is not the likely culprit. On the other hand, if your dryer won’t start or does not produce any heat, it is very likely that this fuse is the problem. The fuse has two 3/16 inch male terminals and is attached to two 3/16 female terminals on the dryer blower wheel housing. Blown fuses can be caused by clogged dryer vents and we highly recommend checking to make sure that all of the vents are clear of lint when replacing the fuse. Vacuum cleaner comes pretty handy when cleaning dryer vents. And, as always, when dealing with electricity, you must insure that the power is shut off to your appliance before performing any repairs or disassembly. This dryer thermal fuse is fairly simple and quick to replace and is a good reminder to keep your dryer vents clean.

Works with most top name brand dryers: Whirlpool, Sears, Kenmore, Roper, KitchenAid, Maytag, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef.

Fixes the following symptoms:

No heat or not enough heat
Dryer won’t start
Too hot
Takes too long to dry
Won’t shut off
Timer won’t advance
Dryer won’t tumble
Control Panel / Touch Pad won’t respond

Felt for trap duct in dryer. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dryer Parts In Houston, eg:

• What are Top 10 Dryer Parts In Houston for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dryer Parts In Houston to buy?
• What are Top Rated Dryer Parts In Houston to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dryer Parts In Houston?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dryer Parts In Houston.
• Before deciding to buy any Dryer Parts In Houston, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dryer Parts In Houston and What you should consider when buying the Dryer Parts In Houston and Where to Buy or Purchase the Dryer Parts In Houston. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dryer Parts In Houston of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dryer Parts In Houston.