Best Flex 3401 Vrg Polisher

From the Manufacturer

The new POLISHFLEX was developed by professionals for professionals. Motor and gear unit both operate extremely quietly. The optimum speed range of 600-2100 RPM and the high torque are ideal for treating a variety of surfaces. The ergonomic design and low weight make it easy to reach and prepare even problematical spots. The maximum polishing pad diameter is 200 mm which enables horizontal and vertical surfaces to be quickly and comfortably treated. Continuous speed control trigger for a gentle start, starting speed at Setting 1 (600-2100 rpm) and a lock-on for continuous operation. Optimized air ducting for optimum cooling of motor and gear, no annoying exhaust air for the user. Innovative combination of planetary and angular gears reduces noise to an absolute minimum. Spindle lock: ideally positioned to prevent operating error and does not interfere with the grip area.

Product Description

Flex XC 3401 VRG Dual Action Orbital Polisher The orbital rotation of this innovative polisher simulates the circular movement of the human hand while polishing. At the same time, the polisher’s highly smooth running facilitates a careful, precise finish and even offers what is necessary for hologram-free polishing. That’s just what this polisher, with its ergonomically designed knob handle, was made for. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length there is also the possibility of removing existing holograms from black finishes. Thanks to the direct orbital drive, very little heat develops on the surface, which is ideally suited to temperature-sensitive finishes. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed. Note: the machine’s orbital movement has been optimally adapted for the special back pad included with it. SPECIFICATIONS Maximum polishing pad diameter: 6.5 inchesVelcro pad: 5.5 inchesSpeed without load: 160-480 rpmOrbit (stroke length): 8 mmOrbit rate, without load: 3200-9600 opmPower input: 900 WattPower output: 590 WattWeight: 5.75 lbs. ADVANTAGES AT A GLANCE FLEX seven-fold microprocessor electronics: with consistent speed control by tachometer generator, soft start, accelerator trigger switch, restart protection after power interruption, overload protection, temperature monitoring, and speed selection 8 mm orbital movement Permanent direct drive for an even polished surface Removable, ergonomic knob grip High-powered motor: can handle extreme loads Spindle lock Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage 10″ Black power cord Free Blue Microfiber Cloth with Purchase of Flex Tool!!

From the Manufacturer

The orbital rotation of the innovative FLEX XC 3401 VRG Polisher simulates the circular movement of the human hand while polishing. It’s highly smooth running facilitates a careful, precise finish and even provides what is necessary for hologram-free polishing. The positive drive ensures a uniform movement, even under load. Thanks to the direct orbital drive, very little heat develops on the surface, making this tool ideally suited to temperature-sensitive finishes. The machine’s orbital movement has been optimized for the special back pad and sponge (140 x 30 mm) included with it. Includes 1 grip cover, 1 knob grip, and 1 special Velcro backing pad. 7.8 amps, 5.7 lbs.