The Best Johnson Controls Kegerator Thermostat
Nowadays, there are so many products of johnson controls kegerator thermostat in the market and you are wondering to choose a best one.You have searched for johnson controls kegerator thermostat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings johnson controls kegerator thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
636 reviews analysed
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Johnson Controls A421ABC-04C Penn Series A421 Line-Voltage Type 1 Electronic Temperature Control, IP20 Standard Enclosure, 120/240 VAC, Includes an A99BB-400C Temperature Sensor with 13′ 1-1/5" Cable
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
Ketotek AC 110V Digital Temperature Controller Incubator Thermostat Fahrenheit 10A 2 Relays Cool Heat NTC 10K Sensor
- KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(<
- 1°F).
- WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
- OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
- ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
- KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor
- 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- 5.√Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Main features:
*Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period
Specification:
Maximum output load：120Vac, 60Hz, 15A, 1800W
Temperature measurement range：-40℃~100℃/-40℉~212℉
Temperature display accuracy：0.1℃/℉(<100℃ )="">
Relative humidity measurement range：5~99%RH
Humidity display accuracy：0.1%RH
Display unit：temperature：Celsius °C or Fahrenheit °F；humidity：%RH
Ambient temperature：-20℃~60℃/-4℉~140℉
Storage environment：temperature：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m（78.74in）
Humidity sensor cable Length: 2m（78.74in）
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Warranty: 2 year
Package Content:
1x ITC-608T temperature and humidity controller;
1x Temperature sensor
1x humidity sensor
1x Manual
Conclusion
By our suggestions above, we hope that you can found Johnson Controls Kegerator Thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Johnson Controls Kegerator Thermostat, eg:
- What are Top 10 Johnson Controls Kegerator Thermostat for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Johnson Controls Kegerator Thermostat to buy?
- What are Top Rated Johnson Controls Kegerator Thermostat to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Johnson Controls Kegerator Thermostat?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Johnson Controls Kegerator Thermostat.
- Before deciding to buy any Johnson Controls Kegerator Thermostat, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Johnson Controls Kegerator Thermostat and What you should consider when buying the Johnson Controls Kegerator Thermostat and Where to Buy or Purchase the Johnson Controls Kegerator Thermostat. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Johnson Controls Kegerator Thermostat of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Johnson Controls Kegerator Thermostat.
