Best Planer With Helical Head
Nowadays, there are so many products of planer with helical head in the market and you are wondering to choose a best one.You have searched for planer with helical head in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings planer with helical head which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Byrd Tool Shelix cutterhead for Dewalt planer DW735
Amazon.com
- Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
The overall cutterhead diameter is 0.088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
RIKON Power Tools 25-130H 13-Inch Planer with Helical Head
Amazon.com
- Powerful 15 Amp, 115V motor cuts wood to a maximum 1/8" depth without
- 6 row Helical Cutter Head cuts cleanly for a fine, smooth finish on hard or soft woods
- 26, double sided HSS inserts change easily if dull or knicked.
- Generous, maximum planning width of 13" and thickness of 6".
- Powerful 15 Amp, 115V motor cuts wood to a maximum 1/8" depth without
- 6 row Helical Cutter Head cuts cleanly for a fine, smooth finish on hard or soft woods
13″ Planer with Helical Head. Powerful 15 Amp, 115V motor cuts wood to a maximum 1/8″ depth without. 6 row Helical Cutter Head cuts cleanly for a fine, smooth finish on hard or soft woods. 26, double sided HSS inserts change easily if dull or knocked.
14mm Carbide Square Cutter Insert 14x14x2mm 30 degree Replacement Knives for Grizzly T21348 Spiral heads and Woodworking Spiral Helical Planer Head – all 4 Sides – 10 Pack
Amazon.com
- 14mm Carbide Cutter Insert 14mm x 14mm x 2mm -30* Cutting angle Replacements Knives.
- The 4 cutting edges have the 30 degree corners are chamfered. Easy to change the cutting edge or replace.
- Spiraled Stagger tooth to break up chips for dust collection, Helix to assist the chip flow, Shear to give clean cutting action , Shear on each knife for true helical cut, Clearance between knives for chip flow, Inexpensive 4 sided replaceable carbide, Unbelievably quiet
DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
Amazon.com
- Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
Product description
Includes 13-in Two-Speed Thickness Planer – DW735X, Dust Hose Adapter, Dust Ejection Chute, Extra Set of Knives, Infeed Table, Outfeed Table
From the Manufacturer
The DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease. The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier. The two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. It has a fan-assisted chip ejection that vacuums chips off of the cutter-head and exhausts them out of the machine. With a 19-3/4″ cast aluminum base it is 2X more rigid than a standard 10″ base and folding tables. The automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. It also has a material removal gauge and extra-large thickness scale that deliver accurate cuts with every pass. The extra-large turret depth stop allows users to return to most frequently used thicknesses with ease. Includes infeed and outfeed tables and an extra set of knives.
Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
Amazon.com
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
The overall cutterhead diameter is the same as the original OEM head. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
OSCARBIDE 2-3/8 inch Carbide Inserts Cutter 60mm 2 Edges Knives Scrapers(60x 12 x 1.5mm) for Woodworking Wood Surfacing Groovers Helical Planer Cutter Heads & Hand Hold Scraper 10pcs
Amazon.com
- Rectangle Insert knives Size: 2.4" x 1/2" x 3/50" (60x 12 x 1.5mm)
- Oscarbide Inserts made of solid tungsten carbide making it the most durable, and polished to a mirror finish for smoother cutting and longer tool life
- 2-Edge Indexable blades make it changing the knives faster with lesser downtime.
- Suitable for wood surfacing / planing cutterheads, groovers, helical planer cutter heads, and other woodworking applications.
13" JET Helical Style Bench Top Planer, Jwp-13Bt
Amazon.com
- Helical style cutter head with 6 rows of 24 individual quick change inserts, provides a clean and smooth cut with easy to change blades
- Precision machined cast iron bed and steel cover assists in keeping boards flat and reduces snipe
- Four post design for maximum control and support of cutter head in reference to work piece and cast table
- Powerful 2HP 15 amp motor turns the cutter head at 10, 000 RPM
Jet – JWP-15HH: 15-inch Helical Head Planer
Amazon.com
- Helical insert cutterhead with staggered carbide inserts for a superior finish and quieter cut
- Heavy-duty cast iron and steel construction for added strength and durability
- Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs
- Large, cast iron, precision ground table for precise workpiece support
- Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power
14mm Carbide Inserts Cutters Knives Replacement Square Straight 14mm x 14 x 2mm with Screws for Grizzly T21348 and Woodworking Spiral Helical Planer Head 10pcs
Amazon.com
- Standard Size-14mm(length)X14mm(width)X2.0mm(thickness) square straight with 4 edges,30 degree cutting angle
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
- 10 pieces per box,packed with a plastic container for safe and easy storage
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
15" JET Helical Cutterhead Planer, JWP-15BHH
Amazon.com
- Innovative JET - precision air strut system (pass) provides consistent upward pressure on the Cutterhead, reducing the chance of board snipe
- Helical Cutterhead houses 48 staggered Carbide knives that are engineered to align themselves without any adjustment for a superior finish and quieter cut
- Heavy-duty precision ground cast iron table and four post design provides maximum control and support when passing boards through Planer.
Dark Stone spiral Cutter Head for Dewalt DW735 planer
Amazon.com
- Outstanding finish compared to HSS straight knives
- Chip out is nearly non-existent with spiral shearing action
- Reduced noise
- Improved dust collection
- Extreme long life with 4-sided carbide insert knives that are easy to replace.
OSCARBIDE 15mm Square Carbide Inserts Cutters (15 x15 x2.5-R150) Replacement Insert Cutter 6”Radius Face for Woodworking Spiral/Helical Planer Cutter Head Wood Turning Tool 10pcs
Amazon.com
- Carbide Cutter size: 15mmx15mmx2.5mm,4-indexable cutting edge,30* Cutting bevel, With 150mm Radius and 4 Radius Corners,polished to a mirror finish for smoother cutting and longer tool life
- Made of Tungstern Carbide, more endurable ,for long time using.
- This replacement carbide inserts are specifically designed to fit Titan Spiral Shear Heads for surfacing/planing cutterhead,groovers,helical head etc
