Best Sander For Car Paint

6" pad
Weight: 1020g,
Lenghth:150mm.
Height:95mm
Air consumption: 8cfm
Non-load rotation: 10000 rpm
Orbit dia: 3/16"

1.Long time working without fatigue
2.Fast sanding speed and high working efficiency
3.40Cr Cylinder
4.Ergonomic design for increase comfort and convenient level.
5.High rotation speed

Warm Tips: Air sander

✔Before use, you should check the grinding wheel to ensure there is no flaw on the protective cover.

✔When orbital random sander need to replace the wheel, you should close the valve first, and then replace the wheel appropriately, make sure not be too tight or too loose.

✔After project work, close the pipe valve first, then the grinder, pressure relief, and last remove the grinder switch.

✔Grinding wheel should be kept dry and can not be stored in humid or open-air place.(NOTE: our sander can not be used for wet grinding, if needed, please purchase the specialized water mill tools. )

Specifications: Pneumatic orbit polisher  

☛Item Material: Aluminum Alloy + Plastic

☛Certification: CE 

☛Sanding Pad: 6 – Inch (150mm)

☛Free Speed: 10000RPM

☛Max Pressure: 90PSI3.28

☛Dimentions: ￠ 5.9 * H3.9inch (￠ 150*H100mm)

☛Air Consumption: 350L / MIN

☛Pendulum Diameter: 1/4″ 

☛Outlet Hose Diameter: ￠ 0.78inch 

☛Working Pressure: 6.3bar 

☛Hose Length: 3.28ft (1m)

☛Noise Value: 100db 

☛Item Weight: 2.6 Pound

Package Included:

◆1 x Mini Dual Action Air Sander 

◆1 x Trachea Quick Connector 

◆1 x Wrench 

◆7 x 240 # Sandpaper 

◆1 x Hose 

◆1 x Dust Bag 

◆1 x User Manual

Black & Decker BDERO100 5-inch Random Orbit Sander features random orbital action for high removal rate and a high quality finish. This sander offers a hook and loop system for fast and easy paper changes. It also has a dust sealed switch to keep all dust and debris out, to extend tool life.

The DEWALT DWE6324K 5″ Variable Speed Random Orbit Sander features a 3.0 Amp motor that spins the pad at 8,000 – 12,000 OPM. Its shorter height allows the user to get closer to work piece for sanding. It has a rubber over-mold in all of the critical areas of the sander to reduce user fatigue. A separate counterweight design reduces vibration for improved comfort and an improved dust-sealed switch to protect against dust ingestion for longer switch life. Improved dust collection that interfaces with our vacuum locking system. The dust bag has one-hand locking system – and the port is designed to fit directly to DWV010 or DWV012 dust collectors. To attach dust port to other vacs with 1 1/4″ hoses use WV9000 universal quick connector. Commonly used for sanding wood, sanding metal, sanding plastics. Includes: Sander, Dust Bag, Owners Card, Carrying Case (bag).

Product description

While supplies last: receive FREE bag & gloves! Powerful, 12.0-Amp, all ball-bearing construction for long life and performance for the most demanding applications Electronic module maintains specified speed under load delivering better finish results Conveniently located variable speed dial lets user set maximum speed from zero to 600/3500 rpm for different materials and applications Wool Ingestion Shields eliminates wool ingestion increasing tool life and reducing service costs Non Mar Rubber Gear Case Cover reduces surface imperfections and improves gripping surface  DeWALT DWP849X 7" / 9" Variable Speed Polisher with Soft Start

From the Manufacturer

The DeWALT DWP849X 7-Inch/9-Inch Variable Speed Polisher has a powerful, 12.0-Amp, all ball-bearing construction motor for long life and durability. It has electronic control that maintains specified speed under load delivering the desired finish results. The conveniently located variable speed dial lets user set maximum speed from 0-600/3500 rpm for different materials and applications. It also has a variable speed trigger allows user to control speed from 0 to dialed maximum setting easily. It has heat-treated, precision-cut steel gears for smooth operation and external brush caps for easy servicing. The large spindle lock button allows for easy and quick backing plate changes. It also features a Wool Ingestion Shield that eliminates wool ingestion increasing tool life and reducing service costs and a non Mar Rubber Gear Case Cover that reduces surface imperfections and improves gripping surface. Includes Polisher, hook and loop backing pad bale and straight side handles.

Product Description

The Wagner paint Eater 4-1/2 in. Disc sander is tough on paint but gentle on the surface. The high-performance, spun-fiber disc operates at 2,000 RPM to provide the proper combination of disc performance and user control and features an open-web disc design to minimize paint and dust build-up. Use the sander on its edge to remove paint chips, or operate it flat for smooth, feathered paint edges that create an ideal surface for repainting. High-power 3.2 amp motor provides powerful performance. 2,000 RPM provides the optimal combination of disc performance and user control. High-performance, spun-fiber 3M disc aggressively removes paint yet is gentle on surfaces.

Amazon.com

The Wagner PaintEater is a one-step paint remover that’s aggressive on paint but gentle on siding and trim. Included in the system are the PaintEater machine and 3M spun-fiber disc, which work together to get rid of paint, feather rough edges, and smooth the surface of wood, masonite, steel, or concrete. In just one step the PaintEater eliminates the time-consuming, labor-intensive chores of traditional exterior-paint prep and ensures that your new paint will go on smoother, adhere better, and last longer.

The Wagner PaintEater package includes: Wagner PaintEater 3M disc

Features include the tool’s Flex-Disc, which is pliable for handling both flat and curved surfaces. View larger.

Quickly and Easily Prep Your Home’s Exterior
Painting a home’s exterior is a big project, but one that pays off in curb appeal as well as protection for your home. The first and most tedious step in painting your home is to get rid of loose or flaking paint and to prepare a smooth surface for a fresh coat. The PaintEater is an award-winning tool from Wagner Spray Tech and 3M that will help make quick work of this process.

The Wagner PaintEater was awarded the Handyman Club of America’s Member Tested and Recommended Seal and Contractor Tested and Recommended Seal.

Aggressive on Paint, Gentle on Siding and Trim
The Wagner PaintEater aggressively removes paint but is easy on underlying substrate. With the PaintEater you can prepare most outdoor surfaces, including wood and masonite siding, concrete, and steel. The machine’s powerful, 3.2-amp motor delivers 2,600 RPM for removing even the most stubborn pain, paint oxides, and mildew; this optimal rotary speed gives just the right combination of performance and control.

Flex-Disc System for Precise Results
The PaintEater combines a high-powered machine and a tough 3M spun-fiber disc with high-performance abrasive embedded into the fibers. Together they provide you with speed, power, performance, and control, so you don’t have to worry about damaging surfaces.

The PaintEater’s innovative Flex-Disc System allows the disc to conform to surfaces for precise results around flat trim and siding. The disc can be operated on its edge–to remove stubborn paint chips–or flat–to smooth or feather edges. The outer edge of the disc is ideal for preparing the surface underneath lap siding. The disc’s compact size–4-1/2 inches–allows you to access tight corners; its open-web design minimizes buildup of paint and dust and allows the disc to easily glide over screws, nails, or sharp edges without damage.

Removing the disc is just as simple as using it–no tools required. Simply engage the arbor lock and unscrew.

Ergonomic Design Provides Comfort and Safety
The PaintEater is ergonomically designed to allow for multiple hand positions and to ease hand fatigue. It can safely be used with either the right hand or left hand, and the retractable handle and soft-grip cover allow you to easily switch between one-handed and two-handed operation. And even with its rugged, glass-filled polypropylene body, the PaintEater is lightweight enough for you to carry from job to job.

A shroud design at the base of the unit ensures that your hands stay safely away from the disc during operation. For added protection, the PaintEater features a Velcro strap for securing the tool safely to your hand when working on a ladder, rooftop, or when you just need extra leverage. For peace of mind, a silicon boot protects the on/off switch from dust and moisture.

The Wagner PaintEater is backed by a one-year limited warranty.

What’s in the Box
Wagner PaintEater and 3M disc.

See all Product description

The PaintEater powerfully removes paint, then gently smooths the underlying surface to prepare it for a fresh coat.

Description
This is our electric polisher/buffer/sander/grinder, Which will handle all of your daily needs from the typical home/car owner to a collector. With 900W powerful motor, D-type handle, it can be perfectly used for light to medium duty sanding and polishing tasks. Don’t hesitate to buy it now!

Feature
Dual action
Powerful motor with heat treated precision cut gears
Convenient speed dial
Safety switch
Externally sponge round pad
D-type handle easy control
Perfect for home and business applications

Specification
Pad size: 6″
Rated Voltage:  110 V / 60 Hz
Amperage: 4A
No-Load Speed: 2000-6400/min

Accessories included:
1 x Backing pad
1 x D-type handle
1 x Open-end wrench
1 x Allen wrench
2 x Carbon brush

Package includes:
1 x Electric Polisher
1 x Instruction

Product Description

3M Paint and Rust Stripper 7771NA 10 Brush Mandrels Hardware Department, Open Stock. Cleans rusty surfaces with a double-thick edge to strip quicker. Features Scotch-Brite abrasive web that won’t rust or splinter like wire brushes. Conforms to surface contours, reduces gouging and leaves a smooth paintable surface. Fits all standard household drills: 1/4-Inch, 3/8-Inch and 1/2-Inch. Use as a rotary disc (on face) or as a brush (on edge).

From the Manufacturer

3M Paint and Rust Stripper 7771NA 10 Brush Mandrels Hardware Department, Open Stock. Cleans rusty surfaces with a double-thick edge to strip quicker. Features Scotch-Brite abrasive web that won’t rust or splinter like wire brushes. Conforms to surface contours, reduces gouging and leaves a smooth paintable surface. Fits all standard household drills: 1/4-Inch, 3/8-Inch and 1/2-Inch. Use as a rotary disc (on face) or as a brush (on edge).

Product Description

Highlights: 6 Inch-Orbital Action Random orbit action for a fast High quality finish Two handle for comfortable and ease of use Specifications: Orbits/min – 4,400 OPM Cord length : 10 ft Includes: Waxer/polisher (1) foam applicator bonnet (2) wool polishing bonnets Amazon.com The Black & Decker 6-inch Random Orbit Waxer/Polisher runs on random orbit at 4,400 orbits per minute (opm) for a professional finish, making it perfect for detailing everything from small projects to tackling cars and boats. The random waxer/polisher provides a smooth, swirl-free finish thanks to its random orbit, while its two-handle design offers you a secure, comfortable grip. It also includes a 10-foot cord for finishing larger jobs without sweat or hassle. The polisher also includes one foam applicator bonnet and two polishing bonnets.

Amazon.com

The Black & Decker 6-inch Random Orbit Waxer/Polisher runs on random orbit at 4,400 orbits per minute (opm) for a professional finish, making it perfect for detailing everything from small projects to tackling cars and boats. The random waxer/polisher provides a smooth, swirl-free finish thanks to its random orbit, while its two-handle design offers you a secure, comfortable grip. It also includes a 10-foot cord for finishing larger jobs without sweat or hassle. The polisher also includes one foam applicator bonnet and two polishing bonnets.